|
By clicking Subscribe, I agree to receive advertising and other marketing messages from Mustang Computers & Supplies under the terms of the Privacy Policy and User Agreement. |
|
Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM
Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM - 10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"
| $1,286.00 | Retail $1,370.30 |
- Single phase 16/20A 200-240V Auto Transfer Switch / ATS PDU
- Enables redundant A/B power option for non-redundant network devices
- Built-in LX Platform Network Interface
- 1U horizontal rackmount; 10 outlets (8 C13 switched / 2 C19 unswitched)
- Individually switched outlets, network interface and 2 digit visual current meter
- TAA Compliant
Manufacturer:
Tripp Lite by Eaton
Item:
PDUMH20HVATNET
UPC Code:
037332151506
Our Part #
TRPPDUMH20HVATNET
Condition
New
$1,286.00EA
$1,370.30
$1,370.30
Availability
Currently out of stock
Product description
Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM - 10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"
10 - 1U Rack-mountable, Zero U Vertical Rackmount TAA"
Specifications
Agitator Type
Tripp Lite
Agitator Type
Tripp Lite
Background Material
Yes
Background Material
Yes
Battery Charger Included
http://www.tripplite.com
Battery Charger Included
http://www.tripplite.com
Belt Type
1U
Belt Type
1U
Bowl Amount
Rack-mountable
Bowl Amount
Rack-mountable
Broth Weight
2 x IEC 60320 C19
Broth Weight
8 x IEC 60320 C13
Broth Weight
2 x IEC 60320 C19
Broth Weight
8 x IEC 60320 C13
Built-in Installation
- PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
- User Manual with Warranty Information
Built-in Installation
- PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
- User Manual with Warranty Information
Bust/Chest Size
PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
Bust/Chest Size
PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
Cake Pan Volume
PDU
Cake Pan Volume
PDU
Cake Pan Volume
PDU
Cake Pan Volume
PDU
Carafe Included
230 V AC
Carafe Included
230 V AC
Contact Plating Material
RoHS
Contact Plating Material
RoHS
Cutting Depth at 90°
PDUMH20HVATNET
Cutting Depth at 90°
PDUMH20HVATNET
Decaffeinated
- PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
- User Manual with Warranty Information
Decaffeinated
- PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
- User Manual with Warranty Information
Drying Load
RoHS
Drying Load
RoHS
Fastener Length
Yes
Fastener Length
Yes
Heat Source (Main Oven)
1U
Heat Source (Main Oven)
1U
Heated
PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
Heated
PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
Hose Thread Size
Input Receptacles: 2 x IEC C20
Output Receptacles:
- 2 x IEC C19
- 8 x IEC C13
Hose Thread Size
Input Receptacles: 2 x IEC C20
Output Receptacles:
- 2 x IEC C19
- 8 x IEC C13
Inorganic Composition
17.3"
Inorganic Composition
17.3"
Ironing Method
Yes
Ironing Method
Yes
Jet Tip Type
Tripp Lite by Eaton
Jet Tip Type
Tripp Lite by Eaton
Ladder Spread Size
240 V AC
Ladder Spread Size
220 V AC
Ladder Spread Size
200 V AC
Ladder Spread Size
208 V AC
Ladder Spread Size
200 V AC
Ladder Spread Size
240 V AC
Ladder Spread Size
220 V AC
Ladder Spread Size
208 V AC
Liner Width
Taiwan
Liner Width
Taiwan
Maximum Cheese Size
1.7"
Maximum Cheese Size
1.7"
Maximum Open-Circuit Voltage
PDUMH20HVATNET
Maximum Open-Circuit Voltage
PDUMH20HVATNET
Maximum Paper Width
PDU
Maximum Paper Width
PDU
Maximum Pressure
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources regardless of phase angle to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser SNMP telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP and NTP.
Maximum Pressure
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources regardless of phase angle to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser SNMP telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP and NTP.
Maximum Pressure
http://www.tripplite.com
Maximum Pressure
http://www.tripplite.com
Maximum Watering Frequency
PDUMH20HVATNET
Maximum Watering Frequency
PDUMH20HVATNET
Minimum Generator Power Supported
Vertical
Minimum Generator Power Supported
Vertical
Minimum Generator Power Supported
Vertical
Minimum Generator Power Supported
Vertical
Minimum Operating Water Pressure
Input Receptacles: 2 x IEC C20
Output Receptacles:
- 2 x IEC C19
- 8 x IEC C13
Minimum Operating Water Pressure
Input Receptacles: 2 x IEC C20
Output Receptacles:
- 2 x IEC C19
- 8 x IEC C13
Minimum Pressure
Tripp Lite
Minimum Pressure
Tripp Lite
Minimum Print Number
RoHS
Minimum Print Number
RoHS
Minimum Watering Frequency
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources regardless of phase angle to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser SNMP telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP and NTP.
Minimum Watering Frequency
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources regardless of phase angle to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser SNMP telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP and NTP.
Monoblock
230 V AC
Monoblock
230 V AC
Mounting Orientation
Vertical
Mounting Orientation
Vertical
Number of Arches
IEC 60320 C19
Number of Arches
IEC 60320 C13
Number of Arches
IEC 60320 C19
Number of Arches
IEC 60320 C13
Number of DMX Ports
IEC 60320 C19
Number of DMX Ports
IEC 60320 C13
Number of DMX Ports
IEC 60320 C19
Number of DMX Ports
IEC 60320 C13
Number of Gliding Racks
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources regardless of phase angle to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser SNMP telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP and NTP.
Number of Gliding Racks
Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources regardless of phase angle to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser SNMP telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP and NTP.
Number of Reclining Positions
10.30 lb
Number of Reclining Positions
10.30 lb
Number of Shackles
Tripp Lite by Eaton
Number of Shackles
Tripp Lite by Eaton
Number of Tines
1.7"